Home Industrial Ventilation Components and Installation
Components of the lineal ventilation
It is composed of linear elements, of different dimensions depending on the ventilation needs, which are arranged on the ridge of the roof. They are supplied mounted. They are used exclusively in static ventilation.
1. Ventilation | Lineal Static |
2. Sealing Elements| Upper Tight Joint |
3. Trimming| Ridge Cup |
4. Sealing Elements | Upper Tight Joint |
5. Outer sheet | INCO 44.4 |
Components of the vertical ventilation
It consists of punctual elements of different dimensions, depending on the ventilation needs, which are arranged on the roof skirts. It is supplied assembled and the miter fits expressly to the slope and the separation of the cover straps. It is used in both static ventilation and dynamic ventilation.
1. Ventilation| Vertical Static Unit ( Upper Element) |
2. Ventilation | Vertical Static Unit ( Lower Element) |
3. Sailing Elements | Upper Tight Joint |
4. Outer Sheet| INCO 44.4 |
5. Trimming| Valley Cover Trim |
6. Trimminig| Ridge cup |
Components of Slat Windows
They are part of any ventilation system, since they are the elements of air intake inside the enclosure. They are arranged in the lower part of the facades, and their surface must be at least 1.5 times greater than the exit surface of the static fans.
1. Trimming| Outside Corner | 7. Ventilation | Slat Windows |
2. Trimming| Rake trim | 8. Outer metal sheet | INCO 44.4 |
3. Trimming| Base Flashing | 9. Insulation| Rock Wool Fielts |
4. Windows trimming | Jamb | 10. Substructure | Hat Purlin |
5. Windows trimming | Lintel | 11. Inner metal sheet | INCO 44.4 |
6. Windows trimming | Sill |