Request a
calculation form

Home / Accessories / Sealing gasket

Sealing gasket

Corrugated tight joints is made by an elastic material (polyethylene) to shut off the water, air and dirt in encounters between profiles and finials. The board may or may not have adhesive. It is available to our entire range of profiles.

Technical characteristics

Polyethylene Foam Properties

Property

Testing method

Units

Value

Densidy

ISO 845 1998

kg/m3

24

Recommended temperature range

Internal

ºC

+95 max
-70 min

Stress-strain curves

ISO 3386/1 1986

  

25% compression

 

kPa

35

40% compression

 

kPa

65

50% compression

 

kPa

100

60% compression

 

kPa

150

Tear resistance

ISO 8067 1991

N/m

410-505

Breaking Point Elongation

 

%

105-95

Permeability

 

ng/Pa/s/m

0.19-0.29

Thermal conductivity

ISO 2581 A8 1975

W/mk

0.037

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data