Request a
calculation form

Home / Projects / Juice and Coloring Factory with the Curved Roof System in Cheste (Valencia) -Spain

Juice and Coloring Factory with the Curved Roof System in Cheste (Valencia) -Spain

Building type: Almacén/Nave industrial

Country: España

Province: Valencia/València

Year of construction: 2014

Amount: 2000 m2

Work: Sandwich curved roof for Juice Factories

Finish: HDX55 pre-painted steel

Related systems:

Related products:

The curved roof solution has been used for the construction of the curved roof for a juice and coloring factory in Cheste (Valencia).

Incoperfil participates in this project with the supply of 2,000 m² INCO 44.4 curved roof sheet with a 275 gr zinc coating on both sides and 55 micron paint protection on both sides (HDX-35 micron type) as well as 1,500 m² of decking and sandwich facades all with HDX-55 micron protection. This solution gives the project a good aesthetic finish, along with high durability and quick installation.

The curved roof system is installed on a precast concrete structure, thus providing great speed and simplicity in the installation.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data