Request a
calculation form

Home / Projects / Self-supporting curved roof with four paddle tennis courts in Paterna (Valencia) – Spain

Self-supporting curved roof with four paddle tennis courts in Paterna (Valencia) – Spain

Building type: Sports and multipurpose facilities

Country: España

Province: Valencia/València

Year of construction: 2015

Amount: 1000 m2

Work: Self-supporting curved roof for four paddle tennis courts

Finish: Granite 25 pre-painted steel

Related systems:

Related products:

The INCO 70.4 Curvado product has been used to cover four parallel paddle tennis courts in Paterna.

Four outdoor paddle tennis courts (Pádel Táctica Paterna) have been covered in the Fuente del Jarro industrial estate (Paterna) with the INCO 70.4 self-supporting curved roof system. The paddle tennis club, which previously had all of its 8 courts outside, has decided to cover half of them with the INCO 70.4 Curved profile, covering an approximate area of ​​1,200 m².

This roof solution offers a good aesthetic finish, along with high durability and great speed of assembly, since it allows approximately one track to be installed per week. In addition, this roof system guarantees the use of paddle tennis courts regardless of weather conditions, thus allowing them to be used at any time of the year.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data