Contact

Request a
calculation form

Home / Solutions / Simple industrial facade

Simple industrial facade

croquis de sistema fachada industrial simple- esquema

The simple industrial façade is formed by a trapezoidal profile fixed on the secondary structure.

The simple industrial facade is made up of a trapezoidal exterior cladding profile that serves as both a sealing element and support for the actions to which it is subjected. Its main function is to provide a watertight and economical closure in constructions that do not require thermal conditioning of the interior.

The corrugated profile of the exterior cladding will meet the mechanical requirements specified in the project and will also guarantee the watertightness of the façade. This profile will be installed on a secondary structure, generally composed of metal, concrete or wooden straps, separated between 1.50 and 3 meters. The most suitable profiles for this industrial façade solution are the INCO 30.4 Facade, INCO 30.5 Facade and INCO 44.6 Facade profiles.

Featured Products

INCO 30.5 profile

INCO 30.5 FACHADA
  • Economy and resistance
  • Support separation up to 3.00 m
  • Thicknesses: 0.60 – 1.20 mm
  • Up to 3,900 m² / transport

INCO 44.4 profile

INCO 44.4 FACHADA
  • Good resistance
  • Support separtions up to 3.50 m
  • Thicknesses: 0.60 – 1.20 mm
  • Up to 3,600 m² / transport

INCO 44.6 Wavy

INCO 44.6 FACHADA
  • Symmetry and aesthetics
  • Self-supporting up to 4 m
  • Thickness: 0,6 – 1,0 mm
  • Up to 4.100 m² / transport

Industrial façade as solar control in the LaM House-Studio, Molina de Segura (Murcia) – Spain.

Ventilated façade made with the corrugated metal profile INCO 44.6, used as a passive solar control solution, enhancing energy efficiency and adding aesthetic value to the industrialized modular construction. The LaM House-Studio, developed by the Murcia-based firm La Mirateca, is a project that merges modular architecture, sustainability, and advanced technology.

Ventilated façade made with the corrugated metal profile INCO 44.6, used as a passive solar control solution, enhancing energy efficiency and adding aesthetic value to the industrialized modular construction. The LaM House-Studio, developed by the Murcia-based firm La Mirateca, is a project that merges modular architecture, sustainability, and advanced technology.

Rehabilitation of old shipyards with simple industrial facade and roofing systems in Seville, Spain

The company Gonvarri, with an investment of 37 million euros, has completed the adaptation of its plant in Seville, a project that will help revitalize the old shipyard facilities.

The company Gonvarri, with an investment of 37 million euros, has completed the adaptation of its plant in Seville, a project that will help revitalize the old shipyard facilities.

Multipurpose pavilion at CEIP Ferrobús by EOVAstudio in Palma del Río

The rehabilitation of the CEIP Ferrobús pavilion in Palma del Río has been carried out with the INCO 44.6 Corrugated perforated profile generating a uniform envelope

The rehabilitation of the CEIP Ferrobús pavilion in Palma del Río has been carried out with the INCO 44.6 Corrugated perforated profile generating a uniform envelope

New construction for Cortes Metalúrgicos Oviedo in Valladolid – Spain

The industrial façade and composite slab systems are part of the solutions provided by Incoperfil in this new construction in the San Cristóbal industrial estate, Valladolid.

The industrial façade and composite slab systems are part of the solutions provided by Incoperfil in this new construction in the San Cristóbal industrial estate, Valladolid.

CICA Group Workshop for Scania in Huelva – Spain

The INCO 70.4 profile in a galvanized finish has been chosen to cover the façade of the new CICA Group workshop for Scania.

The INCO 70.4 profile in a galvanized finish has been chosen to cover the façade of the new CICA Group workshop for Scania.

Projects

Latest projects

v

INCO 155.3 profile

Comprehensive rehabilitation of the Fontecarmoa sports hall in Vilagarcía de Arousa (Pontevedra) – Spain

See more

Fachada de Casa Estudio LaM

INCO 44.6 Wavy

Industrial façade as solar control in the LaM House-Studio, Molina de Segura (Murcia) – Spain.

See more

Bandeja INCO 157.1 para Baomac Electronic Morocco

INCO 157.1 Tray

Self-supporting multi-layer industrial façade with INCO 157.1 Tray profile in TAC area of ​​Tangier – Morocco

See more

INCO 30.4 gonvarri astilleros de Sevilla

INCO 30.4 profile

Rehabilitation of old shipyards with simple industrial facade and roofing systems in Seville, Spain

See more

renovación en poligono los hoyales con perfil INCO 70.4 Colaborante - empresa TECELEC

INCO 70.4 Composite

Comprehensive renovation of the TECELEC headquarters in Laguna del Duero (Valladolid) – Spain

See more

Perfil INCO 44.6 Pabellón colegio Ferrobús en Palma del Rio por EOVAstudio

INCO 44.6 Wavy

Multipurpose pavilion at CEIP Ferrobús by EOVAstudio in Palma del Río

See more

El Edificio Zero Kömmerling se ha desarrollado con los sistemas de cerramiento de Incoperfil en Camarma de Esteruelas (Madrid) - España

INCO 44.6 Wavy

The Zero Kömmerling Building has been developed with Incoperfil enclosure systems in Camarma de Esteruelas (Madrid) – Spain

See more

Nueva construcción para Cortes Metalúrgicos Oviedo en Valladolid - España Los sistemas de fachada industrial y forjado colaborante forman parte de las soluciones aportadas por Incoperfil en esta nueva construcción en el polígono de San Cristóbal,

INCO 44.6 Wavy

New construction for Cortes Metalúrgicos Oviedo in Valladolid – Spain

See more

INCO 44.6 Wavy

Curved facade of the Motion Fit sports center in Montevideo – Uruguay.

See more

Nuevo centro tecnológico de Potencia y Control en Valladolid - España

INCO 70.4 profile

New technological center for Potencia y Control in Valladolid – Spain

See more

INCO 100.3 profile

24,000 m² for the Automotive Sector Supplier Park in Las Hervencias (Ávila) – Spain

See more

INCO 157.1 Tray

The Indian company, Samvardhana Motherson Group (SMG), settles in Tanger Automotive City – Morocco

See more

INCO 44.6 Wavy

Comprehensive reform of the company Covey in Alcalá de Guadaira (Seville) – Spain

See more

INCO 30.5 profile

Phosphate warehouse for CARGILL agro-food company in Uruguay

See more

INCO 44.6 Wavy

Rehabilitation of the facade at the IES Elexalde institute, Galdakao (Vizcaya) – Spain

See more

Fachada INCO 72.1 para ZTT Group en Tanger, Marruecos.

INCO 72.1 Tray

Industrial facade for ZTT industries in Tanger, Morocco.

See more

INCO 100.3 profile

False ceiling with the INCO 100.3 profile for the SGR Global factory in Ibi, (Alicante) – Spain

See more

Sistema de cubierta sandwich autoportante con el perfil INCO 155.3 como elemento resistente por el interior y el perfil INCO 44.4 por el exterior para el Parque de Proveedores de Renault.

INCO 155.3 profile

Expansion of the Renault Suppliers Park in Valladolid – Spain

See more

INCO 44.6 Wavy

Sandwich Facade for Mercedes Benz Adarsa Dealership in Valladolid – Spain

See more

Fachada industrial multicapa SCANIA Huelva - INCO 70.4 Fachada

INCO 70.4 profile

CICA Group Workshop for Scania in Huelva – Spain

See more

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data