Request a
calculation form

Home / Projects / The Indian company, Samvardhana Motherson Group (SMG), settles in Tanger Automotive City – Morocco

The Indian company, Samvardhana Motherson Group (SMG), settles in Tanger Automotive City – Morocco

Building type: Almacén/Nave industrial

Country: Morocco

Year of construction: 2021

Amount: 4200 m2

Work: Samvardhana Motherson Group

Finish: Granite 25 pre-painted steel

Related systems:

Related products:

The INCO 157.1 tray profile has been selected for the industrial façade system of this new construction in one of the most important free zones in Morocco.

The Samvardhana Motherson Group has invested 150 million dirhams for the construction of this second plant in Morocco. This company, which is the third largest manufacturer of automobile equipment in India, establishes itself in Morocco, creating a hundred new direct jobs.

The INCO 157.1 tray industrial façade system has been used in its construction. This self-supporting façade system allows a 6-meter layout between pillars, providing a good smooth interior aesthetic finish as well as allowing savings in the design of the structure.

Perfil INCO 157.1 tray para Motherson en tanger automotive tac, à Tanger. marruecos.

Due to the geographical location of the project, Tanger Automotive City, the wind overload is considerable, which is why the INCO 157.1 tray is the most suitable for meeting the project specifications for both mechanical resistance and interior design.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data