Request a
calculation form

Home / Calculation report / Curved roof calculation

Would you like to receive a specific calculation report for your curved roof?
Fill in the form below and we will send you the report as soon as possible.

Building characteristics

Maximum span of the vault (m) ⁽¹⁾

Plan length of the curved vault (m) ⁽²⁾

Number of vaults (ud)

Structure type

Height of roof supports (m)

Distance between supports (m)

Characteristics of the facade

Front facade openings (%)

Rear facade openings (%)

Left side facade openings (%)

Right side facade openings (%)

Average height of the opening (m)

Frontal obstruction area (m²) ⁽³⁾

Lateral obstruction area (m²) ⁽³⁾

Roof typology

Roofing type

Cladding profile

Cladding profile thickness (mm)

Insulator Type

Insulation thickness (mm)

Separator profile

Separator profile thickness (mm)

Separator profile spacing (mm)

⁽¹⁾ Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

⁽²⁾ Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

⁽³⁾ Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics

Determination of snow load

Degree of harshness of the environment

Type of environment

Exterior environment

Indoor environment

Attached documentation

Structure plans

Additional comments

Comments

Contact information

Company

Company type

Name and surname

Telephone

Project data

Project reference

Total area (m²)

Location

Province

Country

How did you know us?

I have read and accept the Privacy Policy

I am interested in receiving communications about the company's products and services

Request a calculation report for the self-supporting curved roof profile.

This form allows you to obtain a technical report including verifications related to Ultimate Limit States (ULS) and Serviceability Limit States (SLS).

The main actions affecting the roof are considered: permanent loads, imposed loads, wind and snow.
The form also allows the definition of multiple parameters, such as the characteristics of the roof:
maximum vault width (chord), total vault depth, type of structure (steel or concrete), support height, distance between supports, openings in façades, obstructions in the case of canopies, as well as the type of indoor environment (offices, workshops, industrial buildings, etc.) or outdoor environment (rural, urban, industrial or coastal areas).

This curved roof solution is applicable to all types of construction with curved steel sheets: from lightweight canopies to multi-layer or sandwich roofs, with spans of up to 22 metres without intermediate structure.

You can also request other calculation reports available at Incoperfil:

Last News

INCO 155.3 profile

INCO 155.3 self-supporting roof deck for ALDI in Montcada i Reixac (Barcelona), Spain