Request a
calculation form

Home / Projects / High-resistance self-supporting curved roof for a fertilizer factory in the port of Algeciras (Spain)

High-resistance self-supporting curved roof for a fertilizer factory in the port of Algeciras (Spain)

Building type: Almacén/Nave industrial

Country: España

Province: Cádiz

Year of construction: 2015

Amount: 7000 m2

Work: Self-supporting curved sandwich roof for a fertilizer factory

Finish: HDX55 pre-painted steel

Related systems:

Related products:

Supply of 7000 m2 for a curved self-supporting sandwich roof in INCO 44.4 profile, in material with high resistance to corrosion

Self-supporting curved sandwich roof system made up of the INCO 44.4 Curved profile with a thickness of 0.6 mm on the outside and 0.8 mm on the inside. The INCO 44.4 profile protected with a high-performance lacquer, to guarantee a high durability of the cover. HDX-55 type lacquer both inside and outside.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data