Request a
calculation form

Home / Projects / Self-supporting curved roof as a solution for three paddle tennis courts in Albolote (Granada) – Spain

Self-supporting curved roof as a solution for three paddle tennis courts in Albolote (Granada) – Spain

Building type: Sports and multipurpose facilities

Country: España

Province: Granada

Year of construction: 2014

Amount: 600 m2

Work: Three Paddle Courts Cover

Finish: Granite 25 pre-painted steel

Related systems:

Related products:

The curved roof solution using the INCO 70.4 Curvado profile has been used for the construction of three paddle tennis courts for the Cortijo del Aire sports center in the town of Albolote in Granada.

The curved roof solution has been used to cover three paddle tennis courts in Albolote, Granada. Through this covering solution, the outdoor paddle tennis courts continue to be used regardless of the weather conditions, both on sunny days and on rainy days, thus avoiding direct solar incidence, rain, dew, etc.

The self-supporting roof is made up of the INCO 70.4 product, curved at large spans, and can reach up to 13.30 meters of separation between supports without the need for an intermediate structure. The dimensions of the pieces, 0.84 meters wide and up to 13.30 m long, allow for easy installation as well as optimizing for transport to the site by conventional means.

Incoperfil participates in this project with the supply of 600 m² INCO 70.4 curved roof sheet with a 275-gram zinc coating on both sides and pre-lacquered in white RAL 9003. This solution gives the project a good aesthetic finish, together with a quick installation and high durability.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data