Request a
calculation form

Home / Projects / INCO 70.4 Composite Slab for the new Mama Bang Hospital in Bata- Equatorial Guinea

INCO 70.4 Composite Slab for the new Mama Bang Hospital in Bata- Equatorial Guinea

Building type: Hospital

Country: Equatorial Guinea

Year of construction: 2020

Amount: 5000 m2

Work: Hospital Mama Bang

Finish: Galvanised steel

Related systems:

Related products:

The INCO 70.4 Composite Slab profile has been chosen for the construction of the hospital in Bata - Equatorial Guinea

The Guinean government has had a budget of approximately 45 million euros for the new construction of the Mama Bang hospital in the most populous city in the territory, Bata.

The hospital has had the INCO 70.4 Composite Slab system in a thickness of 1.00 mm for slabs of 5,000 m2 in addition to the perimeter finials to prevent concrete casting during the execution phase. The composite slab floor system allows great versatility in different plant solutions, in addition to lightening the weight of the floor and therefore reducing the volume of concrete in the slab.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data