Request a
calculation form

Home / Projects / Deck cover for CONTINENTE group (Albergaria-a-Velha) – Portugal

Deck cover for CONTINENTE group (Albergaria-a-Velha) – Portugal

Building type: Mall

Country: Portugal

Year of construction: 2017

Amount: 10000 m2

Work: CONTINENTE shopping center

Finish: Granite 25 pre-painted steel

Related systems:

Related products:

Deck roof formed by INCO 70.4 for the new CONTINENTE inaugurated in December 2016 in Albergaria-a-Velha (Portugal)

In the city of Albergaria-a-Velha, in northern Portugal, a new Continente shopping center has been inaugurated with more than 1,600 m² of sales area. This hypermarket has had the INCO 70.4 profile to solve the roof using the Deck-type solution. The Deck system, whose main application is for flat industrial roofs (slope between 1% and 5%), allows the waterproofing of the roof without the existence of joints and thermal bridges.

The INCO 70.4 profile, a resistant support for the roof, is a product with excellent mechanical characteristics due to its 70 mm edge. This fact makes it possible to optimize the layout of the structure by separating the secondary support profiles up to 4 m spans. for the loads considered. In addition, the INCO 70.4 profile has been proposed with a thickness of 0.70 mm, considerably reducing the cost of the solution.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data