INCOPERFIL, through the continuous innovation of its products, revolutionizes traditional industrial construction systems by launching the new ribbed profiles INCO 100.3, INCO 155.3 and INCO 157.1 Tray. These extend the range of ribbed profiles currently offered, allowing for better behavior in loads and distances between supports.
These new deep-edged profiles give roofs and façades clear competitive advantages. Given their characteristics, they allow their arrangement directly between the main frame frames of the structure, dispensing with secondary structural elements. In this way, the execution times are also reduced when placing the inner closing layer with a structural function.
INCO PROFILE 100.3
The INCO 100.3 profile can be used for both a façade and a roof and deck. This 100 mm high fret profile allows the structure to be dimensioned optimally, since it reaches free spans of between 4 m and up to 7 m. The manufacturing thicknesses are: 0.60mm, 0.70mm, 0.80mm, 1.00mm, 1.20mm.
INCO PROFILE 155.3
The INCO 155.3 profile can be used for both a façade and a roof and deck. This 155 mm high fret profile allows the structure to be dimensioned optimally since it reaches free spans of between 5 m and up to 8 m. The manufacturing thicknesses are: 0.60mm, 0.70mm, 0.80mm, 1.00mm, 1.20mm.
INCO PROFILE 157.1 TRAY
The INCO 157.1 tray profile can be arranged for both a facade and a sandwich roof. This 157 mm high fret profile allows the structure to be dimensioned optimally and reaches free spans of between 4 m and up to 7 m. The manufacturing thicknesses are: 0.60mm, 0.70mm, 0.80mm, 1.00mm, 1.20mm.
