Request a
calculation form

Home / Projects / INCO 70.4 Composite Slab for the new Zara, in Serrano St., Madrid- Spain

INCO 70.4 Composite Slab for the new Zara, in Serrano St., Madrid- Spain

Building type: Mall

Country: España

Province: Madrid

Year of construction: 2014

Amount: 4500 m2

Work: Rehabilitation of Zara store with INCO 70.4 Composite Slab: 4500 m²

Finish: Galvanised steel

Related systems:

Related products:

The composite slab INCO 70.4 has been one of the products selected for the rehabilitation of an early 20th century building in Serrano 23, Madrid, owned by Inditex group, which houses one of the largest sales points worldwide of such fashion brand.

The rehabilitation of the building in 23, Serrano St., owns to Inditex Group, it is composed by 6 floors and more than 3.000 useful squares meters of sales area. The composite slab solution has been used to the slabs construction. More specifically, the product installed was INCO 70.4 Composite Slab, its advantages like the versatility, resistance; quick installation and cost reduced meet the highest specifications and requirements.

The composite slab INCO 70.4 has a 70 mm height, made in a high structural steel (S320GD) and also the furniture, INCOPERFIL It is accompanied by a technical rapport where the technical office supports the current project.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data