Request a
calculation form

Home / Projects / Guaranteed Industrial Enclosure to the chemical fertilisers warehouse to ERSHIP in Huelva (Spain)

Guaranteed Industrial Enclosure to the chemical fertilisers warehouse to ERSHIP in Huelva (Spain)

Building type: Almacén/Nave industrial

Country: España

Province: Huelva

Year of construction: 2014

Amount: 15000 m2

Work: Roof for a chemical fertilisers warehouse

Finish: Acero Prelacado HPS200

Related systems:

Related products:

For industrial enclosure of ERSHIP in Huelva was used INCO 44.4 profile coated with 200 microns per side.

The covering of 15.000 m2 of warehouse of ERSHIP in Huelva was executed with INCO 44.4 profile.

The specification of the project demanded a guarantee of non-drilling sheet metal up to 20 years due to the close proximity to the sea (less than 1 km). By consistent, we have worked with a material with high corrosion resistance with a zinc coating of 225g / both sides and paint protection of 200 microns per side.

Incoperfil participating in this project with 15,000 m² with the metal sheet for roofing INCO 44.4 with a zinc coating 225 gr / both sides and paint protection of 200 microns per side (type HPS200 Ultra) as well as 125 ml ridge flashings . This solution gives the project a good aesthetic finish, durability along with a guaranteed 20 years.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data