Home / Projects / Industrial facade for ZTT industries in Tanger, Morocco.
Fachada INCO 72.1 para ZTT Group en Tanger, Marruecos.

Industrial facade for ZTT industries in Tanger, Morocco.

Building type: Almacén/Nave industrial

Country: Morocco

Year of construction: 2019

Amount: 1000 m2

Finish: Granite 25 pre-painted steel

Related systems:

Related products:

In 2019, the Chinese group ZTT established a new industrial warehouse in Tangier Automotive City (TAC), on an area of ​​approximately 40,000 m² and with an investment of 20 million euros.

ZTT Morocco has built a unit specialising in the manufacture of electrical cables and optical fibres, creating 200 jobs over time. It should be noted that ZTT is active in the development and production of a wide range of applications in various fields, including telecommunications and renewable energy.

The project included the industrial façade system consisting of the INCO 72.1 tray as a support profile in the office areas. In addition, the linear ventilation system was used, supplying more than 100 m² of G500b linear fans.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data