Request a
calculation form

Home / Projects / Self-supporting Curved Roof for the Línea de la Concepción (Cádiz)- Spain

Self-supporting Curved Roof for the Línea de la Concepción (Cádiz)- Spain

Building type: Dockslands

Country: España

Province: Huelva

Year of construction: 2022

Amount: 500 m2

Work: Border crossings

Finish: Granite 25 pre-painted steel

Related systems:

Related products:

The INCO 155.3 Curved Self-supporting profile has been used on the access control roofs of the border crossing between Spain and Gibraltar.

The Government has invested 5.6 million euros in the reorganization of Customs between La Línea de la Concepción (Huelva) and Gibraltar. Different modules have been built to expedite the entry and exit of people and vehicles. At the border access control points, a series of canopies have been set up with the self-supporting curved roof system.

The INCO 155.3 Curved Self-supporting profile allows reaching spans of up to 23 meters without an intermediate structure, mainly due to its 155 mm edge and its 3-wave geometry. In this case, due to the particularly reduced deflection of the project, the 1.20 mm thick INCO 155.3 Curved Self-supporting profile has been used to guarantee load behavior for a span between supports of 10.80 m.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data