Request a
calculation form

Home / Projects / Perforated steel corten facade for the Liverpool Telephone Service Center in Morelia (Michoacán) – Mexico
Fachada perforada de acero corten para el Centro Atención Telefónica de Liverpool en Morelia (Michoacán) - México

Perforated steel corten facade for the Liverpool Telephone Service Center in Morelia (Michoacán) – Mexico

Building type: Office building

Country: Mexico

Year of construction: 2018

Amount: 3500 m2

Work: Telephone Support Center of Liverpool

Related systems:

Related products:

The INCO 44.6 profile in perforated CORTEN steel has been used to generate a second skin in the new CAT building of the Liverpool chain.

The façade of the Telephone Support Center of Liverpool in Morelia (Mexico) is composed of two elements: internally by a glazed floor-to-ceiling cladding and externally by the INCO 44.6 profile. Waved in micro-perforated corten steel that adapts to the spatial support structure.

The project consists of 3,500 m² of profile INCO 44.6 microperforated (according to R3T6) in corten steel that filters and controls the sunlight inside the offices. The microperforated R3T6, with a percentage of perforations of 23%, allows to have a good degree of lighting inside the premises and at the same time guarantees an important energy saving.

The spatial structure, which serves as support for the facade, has been generated to allow, on the one hand, the arrangement of a series of interior maintenance walkways and, on the other hand, the complex set of triangular volumes. The INCO 44.6 profile is installed with different orientations of the nerves in each triangular plane, emphasizing the volumes and textures.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data