Request a
calculation form

Home / Projects / Comprehensive renovation of Afriquia service stations with the INCO 30.5 profile in Morocco

Comprehensive renovation of Afriquia service stations with the INCO 30.5 profile in Morocco

Building type: Gas stations

Country: Morocco

Year of construction: 2017

Amount: 12000 m2

Work: Renovation of AFRIQUIA service stations

Finish: Granite 25 pre-painted steel

Related systems:

Related products:

The Afriquia gas stations renew their brand image in the country and have had the INCO 30.5 sheet for the execution of the covers

Afriquia SMDC seeks the consolidation of a leader in the fuel sector, carrying out a restructuring of its service stations throughout the country.

They have renewed everything from the number of pumps, metal constructions to the distribution of their service and rest areas, achieving a better experience for the customer.

The roof of the gas stations has been made with the INCO 30.5 model in white RAL 9010. This profile with a useful width of 1050 mm is the usual profile for use on roofs since its 5 waves provide good stability against moderate overloads.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data