Request a
calculation form

Home / Accessories / Ventilation Accesories / Linear ventilation

Linear ventilation

Non-forced ventilation system for industrial warehouses. With static ventilation we achieve:

  • Renew stale air.
  • Evacuate the heat produced by industrial activity or radiation, lowering the ambient temperature of the building.
  • Improve the hygrometry of the warehouse by reducing humidity and therefore condensation.

The G250b model has a throat width of 250 mm.

Non-forced ventilation system for industrial warehouses. With static ventilation we achieve:

  • Renew stale air.
  • Evacuate the heat produced by industrial activity or radiation, lowering the ambient temperature of the building.
  • Improve the hygrometry of the warehouse by reducing humidity and therefore condensation.

The G500b model has a throat width of 500 mm.

Non-forced ventilation system for industrial warehouses. With static ventilation we achieve:

  • Renew stale air.
  • Evacuate the heat produced by industrial activity or radiation, lowering the ambient temperature of the building.
  • Improve the hygrometry of the warehouse by reducing humidity and therefore condensation.

The G915b model has a throat width of 915 mm.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data