Request a
calculation form

Home / Projects / Curved Roofing INCO 30.5 in a recreation area in San Antonio Abad School in Valencia- Spain

Curved Roofing INCO 30.5 in a recreation area in San Antonio Abad School in Valencia- Spain

Building type: Colleges and universities

Country: España

Province: Valencia/València

Year of construction: 2013

Amount: 1000 m2

Work: Covering Surface about 1000 m² of a simple curved roofing and the simple cladding.

Finish: Granite 25 pre-painted steel

Related systems:

Related products:

This time, INCO 30.5 has been used for covering a school playground San Antonio Abad (Salesianos).

The curved roofing of INCOPERFIL has been the best solution to cover the playground of the Salesianos School. It has been composed by metal curved steel and polycarbonate sheet to allow light to enter inside, and the façades has been produced in cream color.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data