Request a
calculation form

Home / Projects / Foundry building of Fumbarri. Restoration of the façade in order to integrate the building with the entourage in Vizcaya- Spain

Foundry building of Fumbarri. Restoration of the façade in order to integrate the building with the entourage in Vizcaya- Spain

Building type: Cultural center

Country: España

Province: Vizcaya

Year of construction: 2013

Amount: 1130 m2

Work: Restoration of the foundry façade

Finish: Granite 25 pre-painted steel

Related systems:

Related products:

Foundry building of Fumbarri. Restoration of the façade in order to integrate the building with the entourage.

The growth of urban and industrial areas proximity to these causes eventually joining them and new challenges for the integration of both.

It is in this sense , foundry building of Fumbarri, located in Vizcaya, façade suitable for the integration with its new residential environment.

The complexity of the design of the new facade of the foundry Fumbarri has required ongoing advice from INCOPERFIL to solve the myriad of meetings that occur within them.

It is composed for six different colors and three different products. It also has perforated sides to resolve the entry of light without breaking the aesthetics to get.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data