Request a
calculation form

Home / Accessories / Ventilation Accesories

Ventilation Accesories

Linear ventilation system for industrial warehouses. With static linear ventilation we manage to renew the stale air and evacuate the heat produced by industrial activity or radiation, lowering the ambient temperature of the building in addition to improving the hygrometry of the warehouse, reducing humidity and therefore condensation.
Our range of specific industrial ventilation, velalos, can be equipped with an electric fan to achieve a forced ventilation system and therefore achieving the following advantages such as adjusting the volume of air to be extracted to our needs, we decide the time and moment of extraction and furthermore, we do not depend on external agents
The slatted windows are combined with industrial ventilation for their proper functioning, as they allow air to enter the premises. Fixed slat windows are manufactured in both galvanized and colored (pre-lacquered steel). Its dimensions are variable and adjust to the measurements that the client needs.

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data