Request a
calculation form

Home / Projects / Parkings covered with solar panels in Montpellier- France

Parkings covered with solar panels in Montpellier- France

Building type: Parking

Year of construction: 2013

Amount: 5000 m2

Work: Parkings covered with solar panels

Finish: Galvanised steel

Related systems:

Related products:

The project executed in Montpellier has incorporated the product INCO 30.4 as a false ceiling, drainage system and protection for photovoltaic panels. At the same time, those photovoltaic panels act as a sunshade, optimizing both the surface and the application.

The project executed in Montpellier has incorporated the product INCO 30.4 as a false ceiling, drainage system and protection for photovoltaic panels. At the same time, those photovoltaic panels act as a sunshade, optimizing both the surface and the application
The project has had an impact in the French media because it saves around 264 tonnes of CO2 per year to the city of Montpellier. The estimated energy production is about 1,291 million kWh / year for 20 years, equivalent to the electricity consumption of 450 households (excluding heating).

View press relaese

Start designing yout project

Request calculation report

Complete the form below to receive a detailed report justifying the most suitable enclosure profile. You will receive the information as soon as possible.

Building characteristics
Industrial roof application loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Application loads for the industrial facade
(1) For sections of the façade profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that are presented in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Deck loads
(1) For sections of the roof profile with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Structure features
Composite slab characteristics
(1) For the sections of the composite slab with 2, 3, 4 or more supports, indicate the greatest distances between supports that appear in your project. Span length < 5,00 m.
Type of environment
Attached documentation
Additional comments
Contact information
Project data
Building characteristics
Characteristics of the facade
Roof typology

(1) Indicate the length of the span of the arch, which is the greatest horizontal distance between the supports of the curved roofing.

(2) Plan-view dimension representing the full length of the curved roof measured perpendicular to the arch span.

(3) Specify the obstructed area under the canopy, in square meters, as a proportion of the total area of the front or side (transverse or longitudinal) façade, in order to calculate the obstruction factor. If it is a closed construction or there is no obstruction area, indicate 0 m².

Environment characteristics
Type of environment
Attached documentation
Additional comments
Contact information
Project data